South Haven Fire


Engine 2710 Spartan Gladiator Cab
Engine 2710 is a 2012 rescue pumper built on a Spartan Gladiator cab and chassis with a custom body built by Spencer Manufacturing. The Engine has a Hale 1500 Gpm pump with 1077 gallons of water and 50 gallons of Class A foam.
The Engine is equipped with a front intake with a pre-connected section of hard suction hose and low flow strainer for drafting operations as well as 1000 feet of pre-connected hose line, 1500 feet of 5 inch supply hose and 200 feet of 3 inch supply hose.

Engine 2711 Pierce Dash Pumper
Engine 2711 is a 2000 Pierce Dash Pumper with a 1250 Gpm pump, 1000 gallon water tank and 10 gallons each of Class A and Class B foam. It is generally the first out for all non-medical incidents at SHFD. It currently has over 1800 feet of 5 inch supply hose, 350 feet of pre-connected cross lays, and 400 feet of 3 inch supply line that may also double as a ground monitor line.

Tanker 2744 Peterbuilt/Midwest Fire
Tanker 2744 was built by Midwest Fire on a 2008 Peterbuilt chassis. 2744 has a 3000 gallon water tank and a 750Gpm (gallon per minute). It also carries a portable tank capable of holding 2500 gallons of water. 2744 is also used as the backup pumper when our engines are down for maintenance.

Squad 2751 2008 Ford F-450
Squad 2751 is a Reading/Darley 250Gpm/300 gallon Skid Unit. 2751 serves multiple functions for the department. This vehicle is first out for brush fires and is used as an EMS chase vehicle.

Rescue 61 (2761) 2008 Internatioal 4900/MedTec
Rescue 61 runs first on all medical calls at SHFD. Rescues 2763 and 2762 rotate second out status on the weather and manpower available.